top of page
Car Factory




The frame is large and reinforced, to grant the utmost rigidity to the structure and chucking table. The gear box is installed between two steel plates, to avoid flexion during operation. The extra height of the vertical post and tool shaft allow operation on tyres to a max. of 15” (381 mm) width.

Controls Sturdy and ergonomic handle. Tool locking with automatic setting of appropriate distance from the rim

Tool Tool with intergrated protection for alloy rims. Adjustable angle and rotation.

Roller To facilitate arm movement during tool positioning.

Pedal assembly Pedals in press-cast aluminium. The pedal assembly can be removed as an integral unit allowing easy servicing.

Bead breaker The bead breaker opening can be adjusted to work with extreme rapidity.

D - VERSION INVEMOTOR 0-15 RPM VARIABLE SPEED The electrical motor is equipped with an exclusive and innovative inverter, which:

  • allows to regulate the chucking table rotation speed by pressing the pedal

  • slows down the rotation speed as the stress on the bead increases (to avoid any damage to the tyre)

I-TYPE = BEAD-SEATER (TUBELESS INFLATOR) Models with tubeless tyre inflation system. The device is activated by a single pedal command with two positionsVersionen mit eingebauter.


Technical data and composition presented in this catologue may vary. Pictures reproduced are only indicative.

Related Products

bottom of page