top of page
Car Factory




Electro-hyrdraulic operating lifts

Equipped with safety valve to prevent overloading and in case of hydraulic pipe fracture

Self-controlled lowering speed

Mechanical safety latch with automatic engagement and hydraulic release ensuring maximum safety when lift is in parking position

Rollers for carriage movement fitted on self-lubricating bearings requiring no maintenance

Warning light when the lift is in parking position

Modular electrical systems enable alterations to be made to configuration (e.g. passing4 to 6 to 8 columns or creating two set s of4 columns by splitting a set of 8 columns)

Operating Features

Electronic system ensuring synchronization of all columns (PLC programmable controller with self-diagnostic system) should the maximum permitted difference in level be exceeded between the carriages. Safety stop in case of malfunction.

Selection of several operating modes possible on the master control box:

Simultaneous operation of all columns

Simultaneous operation of one or more pairs of columns

Single operation of each column

Electronic device selects automatically the correct main supply phase sequence.

Low voltage controls (24 V) on all columns with dead-man push buttons and safety interlock in case of interference in the activated control.

Technical Data

Technical data and composition presented in this catologue may vary. Pictures reproduced are only indicative.

Related Products

bottom of page